คู่มือการลง firmware EasyZone Cloud AP กับ tp-link eap225-outdoor

From EasyZone wiki
Jump to: navigation, search

Installation using the web interface

1. Upgrade the firmware to version v5.0.5, which fixes a bug that may cause the EAP to reboot abnormally during firmware upgrading and cause the device to brick

Download :

v1 https://auto.cloud-hotspot.com/firmware/tplink_eap225-outdoor-v1/v2_9_9/EAP225-OUTDOORv1_5.0.5_%5b20210604-rel51118%5d_up_signed.bin

v3 http://auto.cloud-hotspot.com/firmware/tplink_eap225-outdoor-v3/v2_9_93/openwrt-ath79-generic-tplink_eap225-outdoor-v3-squashfs-factory.bin


2. Enable the SSH-Server via the web interface

Screenshot from 2021-10-21 10-31-48.png

3. ssh into the target device and run `cliclientd stopcs`

Screenshot from 2021-10-21 10-33-12.png
Screenshot from 2021-10-21 10-33-21.png
Screenshot from 2021-10-21 10-34-26.png
Screenshot from 2021-10-21 10-34-39.png

4. upload the factory image via the web interface

Screenshot from 2021-10-21 10-35-12.png

Download :

v1 https://auto.cloud-hotspot.com/firmware/tplink_eap225-outdoor-v1/v2_9_9/easyzone_cloud_ap_tplink_eap225-outdoor-v1_v2_9_9-factory.bin

v3 http://auto.cloud-hotspot.com/firmware/tplink_eap225-outdoor-v3/v2_9_93/openwrt-ath79-generic-tplink_eap225-outdoor-v3-squashfs-factory.bin