Auto Sync Cloud Configuration System Management

From EasyZone wiki
Jump to: navigation, search

What is the Auto Sync Cloud Configuration system?


Auto Sync Cloud Configuration is a gateway hotspot device configuration system through the cloud to facilitate system administrators. In system management

And reduce travel costs to the job site A system profile can be created for every job site to retrieve settings from one location.


--------------------------- Start using firmware version 2.7 or later ------------ --------------------

(Instruction manual included EasyZone Cloud Router User's Guide (Thai))

Enable Auto Sync Cloud Configuration setting

Turning on the system at the router

Normally, the auto sync system will be enabled automatically since the firmware is installed on the router. You can check your router device.

By going to http://10.1.0.1/member, clicking on the System> menu and checking the Auto Sync System Configuration From Cloud menu as in the picture.

Screenshot from 2019-09-25 10-47-13.png

Setting up on the Cloud

Here's how to get started in the Cloud environment. Here's how:

1. Start the setting by going to the desired Hotspot menu.

Screenshot from 2019-09-25 10-42-31.png

2. Click the settings menu. The system will display a submenu. For settings, click Hotspot as in the picture.

Screenshot from 2019-09-25 10-42-46.png

Hotspot settings

You can start setting up the Hotspot system through the cloud. The settings are as follows.

Profile: This is a selection of settings from other Hotspot profiles that have already been set up for speed in system settings.

Enable: is to turn on the Hotspot system

DHCP: Enabling the device to distribute the IP address

Interface: is the interface used to distribute IP to client. The default is br-lan.

IP Address: Specify the gateway ip. The default is 10.1.0.1.

Netmask: This specifies the netmask value. The default value is 255.255.255.0.

Start IP: This is the IP address that is given to the last IP address. The default is 10.1.0.10 - 10.1.0.254.

Amount: is the number of IP addresses distributed. The defaut value is 244 Client (s).

Lease Time: is the lease time of the dhcp server. The default is 3 Hour (s).

DNS Server: is the ip address of dns server. The default is 8.8.8.8.

AUTHEN URL: is the url website used to authen. The default is https://authen.cloud-kingit.com/easy_router.php.

Website Allow: is a website that allows to allow or bypass to use without login hotspot.

Authen Type is the type of authen hotspot. There are 2 values ​​to choose from: CHAP or PAP.

Login By is a special form of login Hotspot, with the following details:

MAC Cookie is to remember the login to the user in order to reduce the problem that users have to login often.

MAC is a mac authen login system.

Social is a login system via social network.

Radius 1: is the domain of radius server 1. The default is rad1.cloud-hotspot.com.

Radius 2: is the domain of radius server 2. The default is rad2.cloud-hotspot.com.

Radius Secret: Radius secret value.

Details as illustrated

Screenshot from 2019-09-25 10-42-46.png


Wireless system settings

You can set up Wireless in both 2.4Ghz and 5Ghz details according to the illustration.

Screenshot from 2019-09-25 11-03-57.png

System Security Settings

You can set the system security by having the following subsystems

- Log setting is a system to store log by can choose from 3 types

Memory is to store the log on the device. The log is not archived when the reboot log is lost.
Remote is sending log to other place. You must enter ip address and port of log server in order to send log.
USB is to store log on Thump drive or External Hard disk device via USB port. You must format the device like FAT32.

For log storage, you can keep http log. 'Use the new IP as follows (159.65.9.53)'

Screenshot from 2019-09-25 11-13-19.png

- Securty Setting system

Is the treatment setting System security, such as blocking bittorrent and opening log storage systems as shown in the picture.

You can block unwanted websites. By filling in the website that you want to block. For example, www.pantip.com, sanook.com

Screenshot from 2019-09-25 11-14-09.png


- IP Control system

Is a bypass client system that can use the internet without login or block client. You can enter both mac address and ip address as in the picture.

Screenshot from 2019-09-25 11-17-51.png

NAT Settings / Port Forwarding

Is a system for port forwarding to other devices in the network. You can set as shown.

Screenshot from 2019-09-25 11-20-04.png


Walled Garden settings

Is the system bypass website or ip address that you want to use without login so users can use immediately, such as the website of the department or the school website.

Screenshot from 2019-09-25 11-27-09.png


Schedule Reboot Settings

Is to set the device to reboot itself, may be set once a day or once a week

Screenshot from 2019-09-25 11-29-27.png

Report system

Is the setting report system to record that When has the system been set up? Useful for Administrator for monitoring and system administration

Screenshot from 2019-09-25 11-31-08.png

Reset Default System

Is to clear all settings to reset the system and reset it

Screenshot from 2019-09-25 11-31-55.png

Turn off the Auto Sync Cloud Configuration

You can turn off the Auto Sync Cloud Configuration on the router.

By going to http://10.1.0.1/member, clicking on the System> menu and going to the Auto Sync System Configuration From Cloud menu and removing the check mark as in the picture.

Screenshot from 2019-09-25 11-34-39.png