Difference between revisions of "Auto Sync Cloud Configuration System Management"

Revision as of 20:28, 7 November 2019

'What is the Auto Sync Cloud Configuration system?'

Auto Sync Cloud Configuration is a gateway hotspot device configuration system through the cloud to facilitate system administrators. In system management

And reduce travel costs to the job site A system profile can be created for every job site to retrieve settings from one location.

'--------------------------- Start using firmware version 2.7 or later ------------ -------------------- '

(Instruction manual included [https://bill.cloud-hotspot.com/wiki/index.php/%E0%B8%84%E0%B8%B9%E0%B9%88%E0%B8%A1%E0%B8%B7% E0% B8% AD% E0% B8% 81% E0% B8% B2% E0% B8% A3% E0% B9% 83% E0% B8% 8A% E0% B9% 89% E0% B8% 87% E0% B8% B2% E0% B8% 99_EasyZone_Cloud_Router 'EasyZone Cloud Router User's Guide' ))

'Enable Auto Sync Cloud Configuration setting'

'Turning on the system at the router'

Normally, the auto sync system will be enabled automatically since the firmware is installed on the router. You can check your router device.

By going to http://10.1.0.1/member, clicking on the System> menu and checking the Auto Sync System Configuration From Cloud menu as in the picture.

'Setting up on the Cloud'

Here's how to get started in the Cloud environment. Here's how:

1. Start the setting by going to the desired Hotspot menu.

2. Click the settings menu. The system will display a submenu. For settings, click Hotspot as in the picture.