Difference between revisions of "คู่มือการลง firmware กับ Netgear R6220"

From EasyZone wiki
Jump to: navigation, search
Line 31: Line 31:
 
9. พิมพ์คำสั่ง reboot   
 
9. พิมพ์คำสั่ง reboot   
  
10. เชื่อมอุปกรณ์  เข้าระบบ internet โดยนำสายแลนอินเตอร์เน็ตมาเชื่อมที่ช่อง LAN แล้ว ssh เข้าไปที่อุปกรณ์  
+
10. เชื่อมอุปกรณ์  เข้าระบบ internet ผ่าน ช่อง WAN/Internet
 +
 
 +
เชื่อมคอมของท่าน ที่ช่อง LAN แล้ว ssh เข้าไปที่อุปกรณ์  
  
 
router ip 192.168.1.1 username root  
 
router ip 192.168.1.1 username root  

Revision as of 18:19, 6 May 2019

คำแนะนำควร reset default อุปกรณ์ เพื่อให้อุปกรณ์ได้ ip 192.168.1.1 ก่อนทำการลง firmware และ ไม่ต่อ internet เข้าอุปกรณ์


ติดตั้งผ่านระบบ Telnet:

1.โหลด firmware ที่ openwrt

โดยโหลดไฟล์

https://downloads.openwrt.org/releases/18.06.2/targets/ramips/mt7621/openwrt-18.06.2-ramips-mt7621-r6220-squashfs-kernel.bin

และ https://downloads.openwrt.org/releases/18.06.2/targets/ramips/mt7621/openwrt-18.06.2-ramips-mt7621-r6220-squashfs-rootfs.bin

คัดลอกไฟล์ openwrt-18.06.2-ramips-mt7621-r6220-squashfs-kernel.bin และ openwrt-18.06.2-ramips-mt7621-r6220-squashfs-rootfs.bin ลง USB flash disk และเสียบไปที่ พอท USB ของ router

2. เข้าเว็บ http://[IP-address]/setup.cgi?todo=debug (หากระบบให้กรอก username ให้กรอก รหัสโรงงาน: admin - password)

3. ในหน้าเว็บจะแสดงข้อความ “Debug Enabled!”

4. telnet ไปที่ IP-address ของ router และ login username “root” (รหัสโรงงาน: admin - password)

5. ใช้คำสั่ง ls /mnt/shares/ เพื่อแสดง path ของ USB

6. ใช้คำสั่ง cd /mnt/shares/U

7. พิมพ์คำสั่ง mtd_write write openwrt-18.06.2-ramips-mt7621-r6220-squashfs-rootfs.bin Rootfs

8. พิมพ์คำำสั่ง mtd_write write openwrt-18.06.2-ramips-mt7621-r6220-squashfs-rootfs.bin Kernel

9. พิมพ์คำสั่ง reboot

10. เชื่อมอุปกรณ์ เข้าระบบ internet ผ่าน ช่อง WAN/Internet

เชื่อมคอมของท่าน ที่ช่อง LAN แล้ว ssh เข้าไปที่อุปกรณ์

router ip 192.168.1.1 username root

12. พิมพ์คำสั่ง cd /tmp

wget http://188.166.243.227/v2_6_14/r6220/r6220_v2_6_11.tar

sysupgrade -n -v r6220_v2_6_11.tar

เป็นอันเสร็จขั้นตอน


ที่มา https://openwrt.org/toh/netgear/netgear_r6220


การอัปเดทครั้งต่อไปใช้ไฟล์ http://188.166.243.227/v2_6_14/r6220/r6220_v2_6_11.tar หรือตัวล่าสุด

โดยอัปเดทผ่านหน้าเว็บของ firmware ตามภาพ

Screenshot from 2019-03-05 12-26-16.png