คู่มือการลง firmware EasyZone Cloud AP กับ TP-Link Archer C50
From EasyZone wiki
Revision as of 18:09, 1 May 2019 by Easyhorpak (talk | contribs) (Created page with " Installing via TFTP ------------------- Prepare an image like following (Filenames from factory image steps apply here) > dd if=/dev/zero of=tp_recovery.bin bs=196608 count...")
Installing via TFTP
Prepare an image like following (Filenames from factory image steps apply here)
> dd if=/dev/zero of=tp_recovery.bin bs=196608 count=1 > dd if=tpl.bin of=tmp.bin bs=131584 count=1 > dd if=tmp.bin of=boot.bin bs=512 skip=1 > cat boot.bin >> tp_recovery.bin > cat owrt.bin >> tp_recovery.bin
Place tp_recovery.bin in root directory of TFTP server and listen on 192.168.0.66/24.
Connect router LAN ports with your computer and power up the router while pressing the reset button. The router will download the image via tftp and after ~1 Minute reboot into OpenWRT.