Difference between revisions of "คู่มือการลง firmware EasyZone Cloud AP กับ TP-Link Archer C50"
Easyhorpak (talk | contribs) |
Easyhorpak (talk | contribs) |
||
Line 20: | Line 20: | ||
Connect router LAN ports with your computer and power up the router | Connect router LAN ports with your computer and power up the router | ||
+ | |||
while pressing the reset button. The router will download the image via | while pressing the reset button. The router will download the image via | ||
+ | |||
tftp and after ~1 Minute reboot into OpenWRT. | tftp and after ~1 Minute reboot into OpenWRT. |
Revision as of 18:13, 1 May 2019
ลง Firmware ผ่าน โปรแกรม TFTP
1. Download Firmware ได้ที่ http://188.166.243.227/firmware/tp_recovery.bin
2. ติดตั้งระบบ TFTP server และนำไฟล์วางใน /root และตั้งค่า ip เครื่องเป็น listen on 192.168.0.66/24.
3. เชื่อม router เข้ากับเครื่องที่ทำ TFTP Server กดปุ่ม reset ค้างไว้และกดปุ่มเปิด router
อุปกรณ์ Router จะทำการดาวน์โหลด firmware และติดตั้ง
4. รอประมาณ 1 นาที เพื่ออุปกรณ์ reboot ตัวเอง
Installing via TFTP
Download firmware at http://188.166.243.227/firmware/tp_recovery.bin
Place tp_recovery.bin in root directory of TFTP server and listen on 192.168.0.66/24.
Connect router LAN ports with your computer and power up the router
while pressing the reset button. The router will download the image via
tftp and after ~1 Minute reboot into OpenWRT.