AP Notify Status Setup Guide via LINE Notify

From EasyZone wiki
Revision as of 16:04, 6 March 2020 by Easyhorpak (talk | contribs) (Created page with " To increase the convenience for system administrators in inspecting network devices so they can see the status and report device status You can set the following device aud...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


To increase the convenience for system administrators in inspecting network devices so they can see the status and report device status

You can set the following device auditing and notifications.

1. Log in to the cloud system.

2. Click on the Hotspot that you want to manage.

3. Click to enter the menu 'Device' Add information about your AP name and add IP address of each of your AP completely.

L1.png
L2.png

4. Click on the menu "AP Status Notify". After that, select the interface hotspot you use.

L3.png
L4.png

The system will display the script for you to copy the script to the terminal of mikrotik and press Enter.

Mikrotik-example-terminal-open.png

The script will check the status of your device every 10 minutes. If there is an Offline option, the system will notify the Cloud.

5. To set up alerts via Line Notify, you must add a Token system to your Staff system by following the instructions. E0% B8% AD% E0% B8% 81% E0% B8% B2% E0% B8% A3% E0% B8% 95% E0% B8% B1% E0% B9% 89% E0% B8% 87% E0% B8% 84% E0% B9% 88% E0% B8% B2_LINE_Token_% E0% B9% 83% E0% B8% 99% E0% B8% A3% E0% B8% B0% E0% B8% 9A% E0% B8% 9A_Staff Guide for setting LINE Token in Staff system

Screenshot from 2018-08-18 13-39-26.png